Select languages
BLUETOOTH COMBO
SPEED & CADENCE SENSOR
Product Info
The Cardiosport Bluetooth Combo Speed and Cadence sensor is designed to let you monitor your bike cadence (RPM) on your smart phone app or bike computer.
Compatible Apps
Strava _cc781905-5cde- 3194-bb3b-136bad5cf58d_ Map My Ride _cc781905-5cde-3194- bb3b-136bad5cf58d_ Wahoo Fitness _cc781905 -5cde-3194-bb3b-136bad5cf58d_Endomondo _cc781905-5cde-3194-bb3b -136bad5cf58d_ Map My Fitness
Cyclemeter GPS Ride With GPS _cc781905 -5cde-3194-bb3b-136bad5cf58d_ Zwift
Set Up Guide
This is a brief guide to setting up your Cadence sensor with your chosen cycling app or ANT+ device.
iOS
The Speed and Cadence sensor is designed to be used on iPhones 4s and newer, iPad 3rd generation or newer, iPad Air and iPod 5th Gen.
android
The Cadence sensor is also designed to be used on Android devices with Bluetooth 4.0. Android devices will require third party apps to access the devices Bluetooth 4.0 (Bluetooth Smart).
ANT+
The Cadence sensor is also designed to be used on all compatible ANT+ devices, such as ANT+ enabled Garmin, Cateye, Sigma and other bike computers.
How to install the Combo Speed & Cadence sensor on your bike
-
Position the Speed and Cadence Sensor on top of the frame on the left side of the bike so that it is inline with the end of crank arm.
-
Using the cable ties provide securely attach the Speed and Cadence Sensor to the frame so that it is sitting vertically.
-
Attach the magnets to the wheel spoke and inside left crank arm using the cable ties provided.
-
(Hint) You can use strong double sided tape to attach the magnet to the inside crank arm if you don't want to use cable ties
-
When attaching the magnets make sure that the speed magnet on the wheel spoke is in line with the thin vertical sensor and that the cadence magnet on the crank arm is inline with the green LED on the sensor case.
-
The green LED light will flash when it detects cadence for and is now ready to pair to your Smart phone or bike computer.
Now your Cadence sensor is ready to be paired with your smart phone or ANT+ device.
How to pair the sensor to a fitness app
-
Download your chosen fitness app from the list below
-
Open/Install the app on your Smart phon/device
-
Ensure that you have switched on Bluetooth on your smart phone
-
Activate your Speed and Cadence sensor by spinning the crank arm on your bike once you have attached the sensor to your bike. A green LED light will flash when cadence is picked up. If this doesn't happen press the button next to the LED.
-
On most cycling apps look for 'add new sensor' or 'find sensors'
-
When your Speed and Cadence sensor appears on the list, select the sensor and follow your app instructions to save the sensor and apply to exercise profile if necessary.
-
When your Cadence sensor has paired to your app you are good to go and cycle. There is no need to repeat the pairing process to your app, as long as Bluetooth is enabled and your cycling app is opened the Cadence sensors will automatically pair when the pedals are rotated.
Changing the sensor battery
If you need to replace the battery simply follow these easy steps.
-
Using a coin insert the coind edge into the groove in the center of the battery door. Rotate the battery door following the arrows and OPEN and CLOSED marks until the door can be removed
-
Remove the dead CR2032 battery and replace with a new battery with the writing on the top of battery facing up.
-
Re-attach the battery door and rotate until the door is firmly shut
Troubleshooting FAQs
Why won't my Speed and Cadence sensor pair to my phone?
-
To ensure that your Speed and Cadence sensor pairs directly to the app you have downloaded please ensure you have Bluetooth devette switched on befor your
Do I need to pair to my phone first?
-
No, you do not need to pair the Speed and Cadence sensor to your phone first, because the sensor uses on Bluetooth Smartredit is only required to you phone.
I am struggling to get an RPM reading from the Speed and Cadence sensor and it doesn't show up under the list of sensors?
-
This can be caused by the sensor not being attached securely to your left crank arm. When attaching to sensor to the left side of your bike frame behind the crank, please ensure that the magnets and attached to the wheel crank arm are inline with the sensor.
Can I pair my Speed and Cadence sensor_cc781905-5cde-3194-bb3b-NT36bad5cf58d_with another app phone de?
-
Yes your Speed and Cadence sensor can be paired with more than one phone/apps. If you are switching between devices or apps then you can still use your _cc781905-5cde- 3194-bb3b-136bad5cf58d_sensor for different devices. Simply pair your Speed and Cadence sensor in the same way as before and you now have a Speed and Cadence_cc781905-5cde-3194-bb3b -136bad5cf58d_sensor for multiple devices.
Can I pair my Speed and Cadence sensor with multiple apps and phones at once?
-
Unfortunately not, once your sensor is paired to the app on your phone it cannot be paired to another app while in use._cc781905-5cde -3194-bb3b-136bad5cf58d_